Panasonic KX-NS1000 - CLIP (Calling Line Identification Presentation)

[Programming Example: System Speed Dialing Table]
Location
(System Speed
Dialing No.)
000
001
System Speed
Dialing Name
*1
ABC Company
XYZ Company
Telephone No.
*2
912125551234
913135551234
CLI Destination
*3
200
300
*1
® 14.1 PBX Configuration—[6-1] Feature—System Speed Dial
—
Name
*2
® 14.1 PBX Configuration—[6-1] Feature—System Speed Dial
—
CO Line Access Number + Telephone Number
*3
® 14.1 PBX Configuration—[6-1] Feature—System Speed Dial
—
CLI Destination
In this example:
If the caller’s telephone number is
"1-212-555-1234":
1. The PBX looks for the number in the System Speed Dialing Table. (The CO Line Access number, "9", is
disregarded.) The number is found in location 000.
2. If CLI distribution is enabled in the current time mode for the DID number or for the CO line carrying the
call (for DIL distribution), the call is routed to its CLI destination, extension 200.
Conditions
• If Automatic Caller ID Modification is used:
Store the modified number in the System Speed Dialing Table.
PC Programming Manual References
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
→
Name
→ CO Line Access Number + Telephone Number
→ CLI Destination
18.2 PBX Configuration
—[10-2] CO & Incoming Call—DIL Table & Port Settings—CLI for DIL—
CLI Ring
for DIL—Day, Lunch, Break, Night
18.3
PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—
CLI Ring for DDI/DID—Day,
Lunch,
Break, Night
Feature Manual References
4.1.3 Caller ID
5.1.7 DID (Direct Inward Dialing)
5.1.8 DIL (Direct In Line)
10.1.11 INCOMING CALL FEATURES
18.1.10 Speed Dialing, System
4.1.15 CLIP (Calling Line Identification Presentation)
Description
Calling Line Identification Presentation (CLIP):
The PBX can send a preprogrammed telephone number to the network when an extension user makes a call.
The called party can see the number on his telephone display before answering the call.
74 Feature Manual Document Version 2016-03
4.1.15 CLIP (Calling Line Identification Presentation)