Note
The following settings can also be specified in the DIL table:
• Tenant number: determines the time mode
(day/lunch/break/night) for the corresponding CO line.
• UM service group number: determines the service group to use when a call is handled by the Unified
Messaging system.
• VM trunk group number: used in Voice Mail DPT (Digital) Integration with a VPS.
Conditions
• To use this feature, DIL must be assigned as the distribution method for the desired CO line port.
PC Programming Manual References
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings—DIL
→
DIL Destination—Day, Lunch, Break, Night
→ Tenant Number
→ UM Service Group No.
→ VM Trunk Group No.
Feature Manual References
4.1.14 CLI (Calling Line Identification) Distribution
10.1.11 INCOMING CALL FEATURES
19.1.3 Time Service
20.1.78 Unified Messaging
—Service Group
5.1.9 Direct SIP Connection
Description
Using this feature, the PBX can be used as a gateway to connect with services provided by external SIP servers.
In this way, extensions and CO lines connected to the PBX can be connected with clients of the external
services.
PBX
Extension
CO Line
V-SIPGW
IP Network
Public Network
External
Server
External
Client 001
External
Client 002
External
Client 003
SIP over TCP
Document Version 2016-03 Feature Manual 97
5.1.9 Direct SIP Connection
To Next Page
Loading...
