20.1.3 Unified Messaging—Alternate Extension Group
Description
A group of extensions that require a different call transfer sequence than other extensions and are therefore
placed into a separate group.
PC Programming Manual References
23.1
UM Configuration—[4-1] Service Settings—Caller ID / PIN Call Routing—23.2 UM Configuration—[4-2]
Service Settings—Parameters—
Alternate Extension
20.1.4 Unified Messaging—Auto Forwarding
Description
Moves
or copies unplayed messages from one mailbox to another after a specified period of time has passed.
A message can be forwarded up to 9 times, and forwarding stops at the 9th designated mailbox. Note that you
cannot auto forward messages to the Mailbox Group, and messages marked as "private" cannot be forwarded.
Also, a message is never forwarded to the original sender of the message.
PC Programming Manual References
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—External MSG Delivery/Auto FWD/Personal
Custom Serv
20.1.5 Unified Messaging—Auto Receipt
Description
Allows a subscriber or the System Manager to receive a message to confirm the reception of sent messages.
When the sent messages are received by a subscriber, the sender will receive a message announcing
"(mailbox name/number) has received your message". Subscribers need to request the Auto Receipt when
they send messages.
Conditions
• This feature is not available when the System Manager sends a Broadcasting Message.
• The reception of External Delivery Messages can be confirmed using this feature as well. Subscribers can
request an Auto Receipt when sending a message to a single recipient or to all members of an External
Delivery Message List, and receive an Auto Receipt for each member in the list.
PC Programming Manual References
21.1 UM Configuration—[2] Class of Service—Mailbox—
Auto Receipt
390 Feature Manual Document Version 2016-03
20.1.5 Unified Messaging—Auto Receipt
To Next Page
Loading...
