20.1.73 Unified Messaging—Recover Message
Description
Enables a subscriber to recover deleted messages. After deleting messages, they will remain in the Deleted
Message
Box until the time specified in System Maintenance Start Time on the following day. Until then, the
subscriber can retrieve the deleted messages from the Deleted Message Box and move them to the Old
Message Box. Message retention time is reset when a message is recovered.
Operating Manual References
Subscriber Operation
1.6.3 Message Playback and Related Features—
Recovering Deleted Messages
PC Programming Manual References
7.11 Utility—UM - System Maintenance
—System Maintenance Start Time
20.1.74 Unified Messaging—Remote Absent Message
Description
Allows a subscriber to change her absent message from a remote location by following the voice guidance.
Feature Manual References
2.1.1 Absent Message
Operating Manual References
Subscriber Operation
1.6.6 Other Features—
Setting Absent Message Remotely
20.1.75 Unified Messaging—Remote Call Forwarding Set
Description
Allows subscribers and the Message Manager to program their extensions from a remote location in order to
forward calls to another extension or to an outside telephone.
There are 6 forwarding settings available:
• FWD All: Forwards all incoming calls to the desired extension number.
• FWD Busy: Forwards all incoming calls to the desired extension number when the line is busy.
• FWD No Answer:
Forwards all incoming calls to the desired extension number when there is no answer.
• FWD Busy or No Answer: Forwards all incoming calls to the desired extension number when the line is
busy or there is no answer.
• FWD to CO: Forwards all incoming calls to Telephone number 1 or 2 (programmed in the Mailbox Setting),
or to any other number.
• FWD Cancel: Cancels the forwarding setting.
Document Version 2016-03 Feature Manual 427
20.1.75 Unified Messaging—Remote Call Forwarding Set
To Next Page
Loading...
