"0" to be dialed first) are treated as extensions of the telephone company and do not get recorded on
SMDR,
because in this case this PBX recognizes the telephone company as the host PBX. Therefore, only
long distance calls are recorded on SMDR.
PC Programming Manual References
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings—Host PBX Access Code
19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR Options—
Option—ARS Dial
Feature Manual References
18.1.6 SMDR (Station Message Detail Recording)
23.1 Capacity of System Resources
9.1.6 Hot Line
Description
An extension user can make an outgoing call by simply going off
-hook, if the user has previously stored the
telephone number or the extension number.
If the Hot Line feature is set and the user goes off-hook, a dial tone is generated for a specified time assigned
through system programming and then dialing starts. During this waiting time the user can dial another party,
overriding the Hot Line feature.
This feature is also known as Pickup Dialing.
Conditions
• Compatible Telephone
Proprietary telephone (PT), single line telephone (SLT), T1-OPX, and portable station (PS)
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—
Dial—Hot Line
(Pickup Dial) Start
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features— Hot Line (Pickup Dial)
Program Set / Cancel
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 2
→ Pickup Dial Set
→ Pickup Dial No.
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 2
→ Pickup Dial Set
→ Pickup Dial No.
Feature Manual References
23.1 Capacity of System Resources
Operating Manual References
1.3.35 Hot Line
Document Version 2016-03 Feature Manual 171
9.1.6 Hot Line
To Next Page
Loading...
