[Example]
Dials "9-0-01-23-4567".
Idle Line
Access No.
Telephone No.
Host PBX
Access Code
Outside Party
(01-23-4567)
Extn. 101 Extn. 102
TRG1
Telephone Company
Host PBX
PBX
Dials "9-101".
Idle Line
Access No.: 9
Idle Line
Access No.
Extn. No.
of the Host PBX
Dials "0-01-23-4567".
Host PBX
Access Code
Telephone
No.
Host PBX
Access Code: 0
Note
In this example,
"0" should be assigned as a Host PBX Access code for trunk group (TRG) 1 of this PBX.
Conditions
• TRS
TRS checks only the dialed telephone number excluding the Host PBX Access code when accessing the
telephone company through the host PBX. (® 19.1.5 TRS (Toll Restriction))
• ARS
A pause is not automatically inserted between the user-dialed access code and the subsequent digits when
ARS mode is enabled. (® 2.1.3 ARS (Automatic Route Selection))
• SMDR
The dialed number including the Host PBX Access code will be recorded on Station Message Detailed
Recording (SMDR) only if the modified number setting is selected in the ARS setting for SMDR.
• When a Host PBX Access code is assigned to a trunk group, calls to extensions of the host PBX are not
recorded on SMDR.
• A Host PBX Access Code can be used to record only long distance calls on SMDR when a CO line port is
connected directly to the telephone company (not a host PBX). This is allowed when the long distance
code (e.g., "0") is assigned as the Host PBX Access code. All local calls (e.g., calls that do not require a
170 Feature Manual Document Version 2016-03
9.1.5 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
To Next Page
Loading...
