PC Programming Manual References
10.9 PBX Configuration
—[2-9] System—System Options—Option 5—
PT Feature Access—No. 1–8
12.1.1 PBX Configuration—[4-1-1] Extension
—Wired Extension—Extension Settings
→Option 5—
Display Language
→Option 5— Incoming Call Display
→Option 5— Automatic LCD Switch when Start Talking
12.2.1 PBX Configuration—[4-2-1] Extension
—Portable Station—Extension Settings
→Option 5—
Display Language
→Option 5— Incoming Call Display
→Option 5— Automatic LCD Switch when Start Talking
18.1 PBX Configuration
—[10-1] CO & Incoming Call—CO Line Settings—
CO Name
Operating Manual References
3.1.2 Personal Programming
5.1.12 Distribution Order
Description
The
distribution method of queued calls in an incoming call distribution group to an idle extension that belongs
to several groups can be selected through system programming.
The following modes are available.
Mode Description
Circular The extension receives the first available call that was received
to the incoming call distribution group which comes after the
incoming call distribution group that sent the previous call.
FIFO (First In First Out) The extension receives the first available call that was received
from all the incoming call distribution groups to which it belongs.
110 Feature Manual Document Version 2016-03
5.1.12 Distribution Order
To Next Page
Loading...
