Operating Manual References
Subscriber Operation
1.6.6 Other Features—
Personal Caller Name Announcement
Manager Operation
2.2.1 System Manager Features— Setting Class of Service (COS) Parameters
2.2.2 Message Manager Features
—
Recording Messages—To record system caller names
20.1.22 Unified Messaging—Call-through Service
Description
Allows
subscribers to make outside calls by accessing the subscriber service menu (from an outside telephone)
and dialing an outside destination. This creates a CO line-to-CO line call.
PC Programming Manual References
21.1 UM Configuration—[2] Class of Service—
Call-through Service
24.4 UM Configuration
—[5-4] System Parameters—Parameters—Transfer to Outside—
Outside Transfer
Sequence—Call Transfer to Outside Sequence
(Up to 16 digits / [0-9 * # D F R T , ; N])
Feature Manual References
5.1.10 DISA (Direct Inward System Access)
Operating Manual References
Subscriber Operation
1.6.6 Other Features—
Call-through Service
20.1.23 Unified Messaging—Class of Service (COS)
Description
Each mailbox is assigned a Class of Service (COS) that determines the set of services that are available to its
subscriber.
Mailboxes can be assigned to their own or to the same COS as needed. COS No. 513 and 514 are assigned
by default to the Message Manager and to the System Manager, respectively. No other mailboxes can be
assigned to COS No. 513 and 514.
Conditions
• The System Administrator (using a PC) and the System Manager (using a telephone) can change COS
assignments.
PC Programming Manual References
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—
Class of Service (Mailbox)
Section 21 UM Configuration
—[2] Class of Service
Document Version 2016-03 Feature Manual 399
20.1.23 Unified Messaging—Class of Service (COS)
To Next Page
Loading...
