Panasonic KX-NS1000 - Group Features

8.1 G
8.1.1 GROUP FEATURES
Description
This PBX supports various types of groups.
1. Trunk Group
CO lines can be grouped into trunk groups based on carrier, CO line type, etc. Several settings can be
assigned on a trunk group basis. All CO lines belonging to a trunk group follow the programming for that
trunk group.
® 11.1.1 PBX Configuration—[3-1-1] Group
—Trunk Group—TRG Settings
Each CO line can belong to only one trunk group. CO lines are assigned to a trunk group based on their
port numbers (for ELCOT/LCOT, PRI, and SIPGW cards) or their channel numbers (for T1 cards).
2. Extension User Group
Extensions can be grouped into extension user groups. Extension user groups then compose the following
groups:
a. Tenant (® 19.1.2 Tenant Service)
b. Call Pickup Group (See below.)
c. Paging Group (See below.)
Every extension must belong to one extension user group and cannot belong to more than one extension
user group.
® 11.2 PBX Configuration—[3-2] Group—User Group
Assignable Extensions: Proprietary telephone (PT)/single line telephone (SLT)/portable station (PS)/SIP
Extension/T1-OPX
[Example]
Extension User
Group 1
Extn. 100 Extn. 101
Extension User
Group 2
Extn. 102 Extn. 103
Extension User
Group 3
Extn. 104 Extn. 105
Extension User
Group 4
Extn. 106 Extn. 107
Call Pickup Group
Using
the Group Call Pickup feature, extensions can answer any calls within the call pickup group to which
they belong. One extension user group can belong to several call pickup groups. (® 4.1.8 Call Pickup)
® 11.3 PBX Configuration—[3-3] Group—Call Pickup Group
® 11.3.1 PBX Configuration—[3-3] Group—Call Pickup Group—All Setting
[Example]
Extension User
Group 1
Call Pickup Group 1
Extn. 100 Extn. 101
Extension User
Group 2
Extn. 102 Extn. 103
Extension User
Group 3
Extn. 104 Extn. 105
Call Pickup Group 2 Call Pickup Group 3
Extension User
Group 4
Extn. 106 Extn. 107
160 Feature Manual Document Version 2016-03
8.1.1 GROUP FEATURES