A link to where users can download the fax printer driver is provided in Web Maintenance Console.
→ "Unified Message
—Fax Driver Tool" in 8.2.1 Users—Add User—Single User
Conditions
• For details about the fax driver, refer to the driver’s documentation.
Operating Manual References
1.6.6 Other Features—
Sending a Fax from your PC
20.1.38 Unified Messaging—Fax Server
Description
If an optional fax interface card is installed on the mother board, the PBX can receive, distribute, and send
faxes. Received faxes can be saved in mailboxes and then forwarded, printed, downloaded, etc. Also,
subscribers, the Message Manager, and the System Manager can send faxes.
The Unified Messaging system can be configured to receive faxes in the following ways:
Method Explanation
Trunk/port service Setting the incoming call service of a service group to fax service
and then assigning the service group to a port allows faxes to be
received at that port.
The mailbox to which faxes are forwarded must also be specified.
→ 22.1 UM Configuration
—[3-1] UM Extension / Trunk
Service—Service Group—
Day, Night, Lunch, and Break
Mode - Incoming Call Service
Caller ID/PIN routing Setting the transfer destination for caller ID routing or PIN routing
to
fax service allows faxes to be received from the specified phone
number.
The mailbox to forward faxes to must also be specified.
→ 23.1 UM Configuration—[4-1] Service Settings—Caller ID / PIN
Call Routing—
Call Transfer for Day, Night, Lunch, and Break
service
→ 23.1
UM Configuration—[4-1] Service Settings—Caller ID / PIN
Call Routing—
Call Transfer for Day, Night, Lunch, and Break
service
DIL/DID routing Routing a call to the Unified Messaging system via DIL/DID and
assigning that entry a UM service group
(® 20.1.78 Unified
Messaging—Service Group) whose service type is Fax allows
faxes to be received through that line.
→ 18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL
Table & Port Settings—DIL—
UM Service Group No.
→ 18.3 PBX Configuration
—[10-3] CO & Incoming Call—DDI /
DID Table—
UM Service Group No.
406 Feature Manual Document Version 2016-03
20.1.38 Unified Messaging—Fax Server
To Next Page
Loading...
