® 4.1.5 Status—Equipment Status—USB
• One-look Networking (® 14.1.4 One-look Network)
A backup/restore cannot be performed for Slave units if you are logged in to the Master unit. To backup/
restore data for a Slave unit, log in to the Slave unit.
• KX-TVA Data Restore
This
feature can be used to import KX-TVA VPS voice data to the KX-NS1000’s Unified Messaging system
voice data.
Installation Manual References
5.3 Starting Web Maintenance Console—Converting KX-TDE or KX-NCP System Data for Use with the
KX-NS1000
PC Programming Manual References
6.8 Tool—UM Data Backup
6.9 Tool—UM Data Restore
20.1.82 Unified Messaging—System Prompts
Description
Are announcements that instruct a caller. A maximum of 8 languages can be stored as system prompts. The
name of each language can be stored as well. When the System Administrator selects a language for the
system settings, the desired language can be selected using this name label data. "Primary" can be specified
by selecting one of the stored languages, and become the default setting unless another language is selected
in the system setting.
Note
• System
prompts can be changed or turned on/off, system prompts for each language can be imported
as WAV files, or re-recorded using a telephone.
• In order to leave more time for recording, the System Administrator is also able to delete specific system
prompts or one of the installed languages used for system prompts.
PC Programming Manual References
7.9 Utility—UM – System Prompts Customization
21.1 UM Configuration—[2] Class of Service—
Prompt Mode
24.4 UM Configuration
—[5-4] System Parameters—Parameters—Prompt Setting
Operating Manual References
Manager Operation
2.2.1 System Manager Features—
Setting Class of Service (COS) Parameters
2.2.2 Message Manager Features
—
Recording Messages
Document Version 2016-03 Feature Manual 431
20.1.82 Unified Messaging—System Prompts
To Next Page
Loading...
