Feature Manual References
20.1.16 Unified Messaging
—Call Transfer to Outside
20.1.20 Unified Messaging—Caller ID Screening
Description
Allows the Unified Messaging system to announce the name of the caller when transferring a call to an
extension from a preprogrammed caller (e.g., "You have a call from [name of caller]."). Caller names must be
recorded beforehand. Caller names can be recorded by each subscriber (Caller Name
Announcement—Personal) and for the entire system (Caller Name Announcement—System).
PC Programming Manual References
21.1 UM Configuration—[2] Class of Service—Call Transfer—
Caller ID Screen
Feature Manual References
20.1.21 Unified Messaging
—Caller Name Announcement
Operating Manual References
Manager Operation
2.2.1 System Manager Features—
Setting Class of Service (COS) Parameters
20.1.21 Unified Messaging—Caller Name Announcement
Description
Allows
you to store telephone numbers and record a caller name for each telephone number. The caller name
is announced when playing a message in their mailbox from one of the preprogrammed callers, when the
system directs a call to the subscriber from one of the preprogrammed callers (Caller ID Screening), and when
the system pages the subscriber by intercom (Intercom Paging).
There are 2 types of Caller Name Announcement.
• Caller Name Announcement—Personal
Allows subscribers to store a maximum of 30 telephone numbers using a telephone.
• Caller Name Announcement—System
Allows the System Administrator to store a maximum of 200 telephone numbers using a PC.
Conditions
• If the same telephone number is programmed for both the system and personal caller name announcement,
the personal caller name will be announced.
PC Programming Manual References
21.1 UM Configuration—[2] Class of Service—Mailbox—
Number of CIDs for Caller Name Announcement
(Selection)
24.3 UM Configuration
—[5-3] System Parameters—System Caller Name Announcement
398 Feature Manual Document Version 2016-03
20.1.21 Unified Messaging—Caller Name Announcement
To Next Page
Loading...
