Button Usage
Call Park (Automatic Park Zone)
Used to park a call in an idle PBX parking zone automatically. (®
4.1.7 Call Park)
Call Log
Used to show a log of received calls. (® 4.1.5 Call Log, Incoming)
Log-in/Log-out
*1
Used to switch between Log-in and Log-out status. (® 10.1.3 ICD
Group Features—Log-in/Log-out
)
Hurry-up Used to redirect the longest waiting call in the queue of an ICD group
to the overflow destination. (® 10.1.6 ICD Group
Features—Queuing
)
Wrap-up
*1
Used to switch between Wrap-up/Not Ready and Ready modes.
(® 10.1.3 ICD Group Features—Log-in/Log-out
)
System Alarm Used to display a PBX error. Also, pressing the System Alarm button
displays
the current One-look network status. (® 12.1.4 Local Alarm
Information)
Time Service
*1
Used to change or display the current time mode (day/lunch/break/
night). (® 19.1.3 Time Service)
Answer
Used to answer an incoming call. (® 9.1.3 Headset Operation)
Release Used to disconnect the line during or after a conversation, or to
complete a Call Transfer. (® 9.1.3 Headset Operation)
Toll Restriction Used to change the Toll Restriction (TRS) level of other extension
users temporarily. (® 5.1.6 Dial Tone Transfer)
Calling Line Identification
Restriction (CLIR)
*1
Used to switch between CLIP and CLIR services. (® 4.1.15 CLIP
(Calling Line Identification Presentation)
, ® 15.1.20 Private
Network Features—QSIG—CLIP/COLP (Calling/Connected Line
Identification Presentation) and CNIP/CONP (Calling/Connected
Name Identification Presentation))
Connected Line Identification
Restriction (COLR)
*1
Used to switch between COLP and COLR services.
(® 15.1.20 Private Network Features—QSIG—CLIP/COLP
(Calling/Connected Line Identification Presentation) and CNIP/
CONP (Calling/Connected Name Identification Presentation)
)
Headset Used to turn headset mode on/off while idle.
Used to switch between hands
-free mode and headset modes
during a conversation. (® 9.1.3 Headset Operation)
Time Service Switching Mode
(Automatic/Manual)
*1
Used to switch between Automatic Switching and Manual Switching
mode. (® 19.1.3 Time Service)
Two-way Record Used to record a conversation into your own mailbox.
(® 20.1.90 Unified Messaging
—Two-way Record/Two-way
Transfer)
Two-way Transfer Used to record a conversation into the mailbox of a specified
extension. (® 20.1.90 Unified Messaging
—Two-way Record/
Two-way Transfer)
One-touch Two-way Transfer Used to record a conversation into the mailbox of a specified
extension with a one
-touch operation. (® 20.1.90 Unified
Messaging—Two-way Record/Two-way Transfer)
142 Feature Manual Document Version 2016-03
7.1.3 Flexible Buttons
To Next Page
Loading...
