Restricted Allowed
Level 3
(Secretary)
• International Calls
• Cellular Phone Calls
• Boss’s Cellular Phone
• Long Distance Calls
• Local Calls
Level 4
(Operator)
• International Calls
• Cellular Phone Calls
• Long Distance Calls
• Local Calls
: : :
In this example, a level 1 user can make any CO line calls. A level 2 user can make international calls to the
countries
where clients are located, and can also make cellular phone/long distance/local calls. A level 3 user
cannot make international/cellular phone calls apart from to the boss’s cellular phone, but can make long
distance/local calls. A level 4 user cannot make any international/cellular phone/long distance calls, but can
make local calls.
To set TRS as in the example above, it is necessary to program the Denied Code and Exception Code Tables
as follows:
Denied Code Tables Exception Code Tables
Level 1 Not Programmable Not Programmable
Level 2 011 Leading number to deny
international calls
011xx Leading number for
countries to be allowed
Level 3 1123755 Leading number to deny
cellular phone calls
1123755xx
xx
Boss’s cellular phone
number
Level 4 1 Leading number to deny
long distance calls
– Not required
: : :
[Programming Example: COS Settings]
COS
1
2
Day
1
2
Lunch
1
2
Night
6
6
Break
1
2
TRS Level
*1
TRS Level for System
Speed Dialing
*2
1
1
*1
®
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—TRS—
TRS Level—Day, Lunch, Break, Night
*2
® 15.5 PBX Configuration—[7-5] TRS—Miscellaneous
—
TRS Override by System Speed Dialing
TRS Settings for Each Level
Through
system programming, it is possible to select a different method of TRS. With this method, each level
has its own separate set of denied codes and exception codes, which are only applied to that level.
® 15.5 PBX Configuration—[7-5] TRS—Miscellaneous—
TRS Table Mode for Level N (N=2_6)
Denied Code Tables
*1
Exception Code Tables
*2
Level 1 Not Programmable Not Programmable
380 Feature Manual Document Version 2016-03
19.1.5 TRS (Toll Restriction)
To Next Page
Loading...
