Object ID Item Description
7 tcpAttemptFails The total number of connections error.
8 tcpEstabResets The total number of resets.
10 tcpInSegs The total number of segments received.
11 tcpOutSegs The total number of segments sent.
12 tcpRetransSegs The total number of segments retransmitted.
14 tcpInErrs The total number of segments received in error.
15 tcpOutRsts The total number of TCP segments sent containing the
RST flag (reset connection).
UDP Group (1.3.6.1.2.7)
Object ID Item Description
1 udpInDatagrams The total number of UDP Datagrams received.
2 udpNoPorts The total number of received UDP Datagrams for which
there was no application at the destination port.
3 udpInError The total number of received UDP Datagrams which
contained error.
4 udpOutDatagrams The total number of UDP Datagrams sent.
SNMP Group (1.3.6.1.2.1.11)
Object ID Item Description
1 snmpInPkts The total number of SNMP messages received.
2 snmpOutPkts The total number of SNMP messages sent.
3 snmpInBadVersions The total number of received SNMP messages of which
version is unsupported.
4 snmpInBadCommunityNames The total number of SNMP messages with unknown
Community Name.
6 snmpInASNParseErrs The total number of SNMP messages with incorrect OID
type.
13 snmpInTotalReqVars The total number of Objects which have been retrieved
value successfully.
15 snmpInGetRequests The total number of Get-Request which have been
accepted and processed
(e.g. Data extract by using
snmpget/snmpwalk command).
16 snmpInGetNexts The total number of Get-Next which have been accepted
and processed (for at the time of following a layer
-tree by
using snmpwalk command).
20 snmpOutTooBigs The total number of sent SNMP messages which returned
an error of "TooBig".
Document Version 2016-03 Feature Manual 471
23.4 Supported Management Information Base (MIB) Table
To Next Page
Loading...
