130
3-7
Image Display
3-7-1 Image Display Screen
This screen displays the marking image of the data that has been set.
The “Image Display” dialog box is appeared by clicking either selecting “1” method or clicking “2” button
described above.
(Here displays the created file.)
1 “View” - “Image”
2
Click .
No. Item Description
1 Zoom-in/Zoom-out buttons Zooms-in and zooms-out the image display by clicking the correspond-
ing button.
2 Display Size Displays the edit area in accordance with the window size of the image
display (height or width).
3 Specify a range to zoom-in Magnifies the scope specified with the selection window to the maxi-
mum size of image display.
4 Adjust the marking position Moves the character string by dragging the image.
5 Adjust the display position Adjusts the display position by dragging the edit area to a new position.
6 Magnification list box Selects the desired magnification using the list box.
Selectable magnification: 100 to 100000%
7 GRID Sets the display/non-display of the grid with an interval of 5mm on an
image display screen.
8 Mouse cursor coordinate Displays the coordinate of the cursor with its center set as the origin.
9 Marking conditions Displays both condition No. of the selected character string and the
coordinate of the marking start position.
To Next Page
Loading...
