Panasonic LP-310 - Current Date Marking; Current Date;Time Marking Setup

71
2-2-4 Mark Current Date
■ Sample
This section describes the procedure for setting the current time.
■ Flow of Procedure
1 2 : 3 0
Hour
Minute
1. Input the function character of the date.
The detail is described in “ a. Input date function character.” (P.72)
2. Set the conditions of the function character of the date and laser.
Set each condition referring to relative item shown below:
“ 3. Set the marking condition.” (P.50) and “ 4. Set the laser.” (P.53) in “2-1-3 Procedure from Laser
Marker Setting to Test Marking”
“3-5 Marking Condition” (P.110)
“3-6 Laser Setting” (P.126)