Panasonic LP-310 - Lot Number Marking; Lot Number Marking Setup

62
2-2-2 Mark Lot No.
■ Sample
Set the lot No. above.
■ Flow Chart
JAN FEB MAR APR DEC
•••••••
January February
March April
December
2. Input the function character of the counter.
The detail is described in “ b. Input the lot function character.” (P.64).
3. Set the conditions of the function character of the counter and laser.
1. Set the lot.
The detail is described in “ a. Set the lot.” (P.63).
Set each condition referring to relative item shown below:
“ 3. Set the marking condition.” (P.50) and “ 4. Set the laser.” (P.53) in “2-1-3 Procedure from Laser
Marker Setting to Test Marking” (P.49)
“3-5 Marking Condition” (P.110)
“3-6 Laser Setting” (P.126)