211
Line Width
This is the setting value for creating clearance at the intersection
of the character strokes.
This is the function for controlling deep engraving due to the
overlap at the intersection of the character strokes. Since the
line width varies depending on the object to be marked and
laser conditions, it is desirable to confirm the line width by
actual marking data.
Laser Start Wait
This is the function for adjusting the waiting time of turning ON
the laser at the start point of the marked line segment. The
marked character gets darker as this value decreases.
Laser End Wait
This is the function for adjusting the waiting time of turning
OFF the laser at the end point of the marked line segment.
The marked character gets darker as this value increases.
Marking Pitch
The bold character marking function draws bold strokes using
several line segments. This is the setting of the pitch of the
several line segments. This setting differs depending on the
material of the object to be marked, however, if the pitch is too
small, the character may be engraved deeply.
Marking Quality
For LP-310, the curves are displayed by dividing them into
straight lines. This function is used for setting the extent to
which they will be divided into straight lines.
Laser Check
For the laser check, laser beam is continuously emitted to a
desired spot in the marking area.
Work Distance
This is the reference distance from the bottom reference
plane of the laser marker to the minimum spot of the marking
laser. This distance depends on individual product, and there
is a variation of around +/-2.0mm.
Marking Range
This is the max. range the laser marker can perform the marking.
Minimum Spot Diameter
(theoretical value)
The spot diameter of 1/e2 to the peat at the minimum spot
position of the marking laser is calculated. The actual spot
diameter is slightly larger.
Marking Shape
The arrangement of the character strings set at the time of
character setting can be set.
Straight Line:The string is arranged along the X axis.
Tilt
:The string is placed at the set angle to the X axis.
Fan Like
:The string is arranged light a fan around the
center the user set.
Current Date/Time Marking
The items (year, month, date, and time) set in accordance
with the internal clock of the laser marker head is marked by
updating them automatically.
Expiry Date/Time Marking
The items (year, month, date, and time) set in accordance
with the internal clock of the laser marker head is marked by
updating them automatically.
Counter Marking
T
he marking is executed with the trigger input after an increment
by the set value.
Lot Marking
The character string that is marked automatically according to
the internal clock of the laser marker head.
Term Outline
To Next Page
Loading...
