Parker ac890 Reference Manual

890SD Standalone Drive
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D Page 5-45
8
9
10
11
A
B
C
D
1
2
3
4
5
6
7
E
Powering-up the Unit
1. Apply the 3-phase supply to the 890SD Standalone Drive.
2. Select LOCAL mode operation:
♦ The Keypad will display the Remote Setpoint parameter (%).
3. You MUST carry out an Autotune if you intend to use the drive in Sensorless Vector Fluxing Mode
or Closed-Loop Vector Mode - go to page 4-
46. If you are using the drive in Volts/Hz Mode (Open-
Loop Drive) an Autotune is not necessary - go to page 4-
51.
REMOTE
LOCAL
Hold the Stop key down until
the display spells
Release the key to display
the previous menu
for example,Local Setpoint

Parker ac890 Specifications

General

Brand	Parker
Model	ac890
Category	DC Drives
Language	English