Parker ac890 - Control Key Definitions

The Keypad
Page 8-32 890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
8
9
10
11
A
B
C
D
1
2
3
4
5
6
7
E
Control Key Definitions
Keys for Programming the Drive
UP
Navigation - Moves upwards through the list of parameters or menus
Parameter - Increments the value of the displayed parameter.
Command Acknowledge - Confirms action when in a command menu.
DOWN
Navigation - Moves downwards through the list of parameters or menus
Parameter - Decrements the value of the displayed parameter.
ESCAPE
E
Navigation - Displays the previous level’s Menu.
Parameter - Returns to the parameter list.
Trip Message - Clear the Trip or Error message from the display.
MENU
M
Navigation - Displays the next Menu level, or the first parameter of the current
Menu.
Parameter - Allows a writable parameter to be modified (this is indicated by
→
appearing on the left of the bottom line). Hold to display the PREF.
PROG
PROG
Navigation - Toggles between current locations within the Operator menu and
any other menu.
LOCAL/
REMOTE
R
L
Control - Toggles between Remote and Local Mode for both Start/Stop (Seq) and
Speed Control (Ref). When toggling, the display automatically goes to the
relevant SETPOINT screen, and the SETPOINT (LOCAL) screen will have the V
and W keys enabled to alter the setpoint.