Parker ac890 Reference Manual

Programming
Page D-168 890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
8
9
10
A
B
C
D
E
1
2
3
4
5
6
7
TRIPS HISTORY
SETUP::TRIPS::TRIPS HISTORY
This function block records the last ten trips that caused the Drive to stop.
To do this, it stores the value of the FIRST TRIP parameter, PREF 97:09, taken from the TRIPS STATUS function block.
Parameter Descriptions
TRIP 1 (NEWEST)
PREF: 96.01 Default: 0 Range: See below
Records the most recent trip that caused the Drive to stop. The values that this (and the parameters below) may take are the
same as tag number 6, FIRST TRIP, detailed in the TRIPS STATUS function block.
TRIP 2
PREF: 96.02 Default: 0 Range: As above
Records the second most recent trip that caused the Drive to stop.
TRIP 3
PREF: 96.03 Default: 0 Range: As above
Records the third most recent trip that caused the Drive to stop.
TRIP 4
PREF: 96.04 Default: 0 Range: As above
Records the fourth most recent trip that caused the Drive to stop.
TRIP 5
PREF: 96.05 Default: 0 Range: As above
Records the fifth most recent trip that caused the Drive to stop.
TRIP 6
PREF: 96.06 Default: 0 Range: As above
Records the sixth most recent trip that caused the Drive to stop.
TRIP 7
PREF: 96.07 Default: 0 Range: As above
Records the seventh most recent trip that caused the Drive to stop.
TRIP 8
PREF: 96.08 Default: 0 Range: As above
Records the eighth most recent trip that caused the Drive to stop.

Parker ac890 Specifications

General

Brand	Parker
Model	ac890
Category	DC Drives
Language	English