Programming
Page
D-172
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
8
9
10
A
B
C
D
E
1
2
3
4
5
6
7
Parameter Descriptions
WARNINGS WORD 3
PREF: 97.16 Default: 0000 Range: 0x0000 to 0xFFFF
Indicates which conditions are likely to cause a trip. These parameters are a coded representation of the warning status. See
below for a description of how this parameter is formed.
WARNINGS WORD 4
PREF: 97.17 Default: 0000 Range: 0x0000 to 0xFFFF
Indicates which conditions are likely to cause a trip. These parameters are a coded representation of the warning status. See
below for a description of how this parameter is formed.
WARNINGS WORD 5
PREF: 97.24 Default: 0000 Range: 0x0000 to 0xFFFF
Indicates which conditions are likely to cause a trip. These parameters are a coded representation of the warning status. See
below for a description of how this parameter is formed.
WARNINGS WORD 6
PREF: 97.25 Default: 0000 Range: 0x0000 to 0xFFFF
Indicates which conditions are likely to cause a trip. These parameters are a coded representation of the warning status. See
below for a description of how this parameter is formed.
FIRST TRIP
PREF: 97.09 Default: 0 Range: see table below
From when a trip occurs until that trip is reset, this parameter indicates the trip source. When several trips have occurred, this
parameter indicates the first one that was detected.
To Next Page
Loading...
Need help?
General
