Parker ac890 Reference Manual

Programming
Page D-188 890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
8
9
10
A
B
C
D
E
1
2
3
4
5
6
7
Notes
You can record your application’s settings here.
Output parameters are not saved in non-volatile memory unless indicated.
1. This input parameter is not saved in non-volatile memory.
2. This input parameter can only be written to when the drive is stopped.
3. The default value is dependent on the power board.
4. The default value is dependent on the frequency board.
5. This parameter is not set from DSE on a partial install.

Parker ac890 Specifications

General

Brand	Parker
Model	ac890
Category	DC Drives
Language	English