2
4.8 Offset 32
4.9 Station setup [By Rectangular & Polar Coordinates] 33
4.10 Station Orientation 34
4.11 Function of MEASURE screen 34
4.12 IH Measurement 37
5. VIEW AND EDIT 38
5.1 Graphical View 38
5.2 Create the Rectangular Point 39
5.3 Edit the Data 39
5.4 Point Code List 40
5.4.1 Point Code 40
5.4.2 Point Code Create 42
5.4.3 Point Code Edit 43
6. FREE STATIONING 44
6.1 Stationing by more than 3 known points 44
6.2 Stationing by two known points 47
7. STAKE OUT 47
7.1 Coordinate Stake Out 47
7.2 Distance Stake Out 51
7.3 Point to Line 52
7.4 Point to Arc 55
7.4.1 Three point 56
7.4.2 Circle radius 58
7.5 Setting Out Point 60
8. CALCULATIONS 62
8.1 Cogo 62
8.1.1 Inverse 63
8.1.2 Point Coordinates 66
8.1.2.1 Point Coordinates, Distance and H. angle 66
8.1.2.2 Distance and H. angle 68
8.1.2.3 H. angle input 69
8.1.3 Circle Radius 70
8.1.4 Line-Arc intersection 72
8.1.5 Line-line intersection 74
8.1.6 Arc-Arc intersection 76
8.1.7 Distance offset 78
8.1.8 Point distance offset 80
8.1.9 Arc distance offset 82
8.2 2D Surface 85
8.3 3D Surface and volume 88
8.4 REM 92
8.4.1 General pictures of measurement 92
9. VPM (Virtual Plane Measurement) 93
To Next Page
Loading...
Need help?
General
