95
Press [ENT] to view the COORD.
ON THE VIRTUAL PLANE screen.
Aim at your desired point and press [ENT].
The Coordinates which you aim at are displayed.
Press the [F1][POINT3] to view the MEASURE
screen.
Aim at point 3 and press [F1][MEAS].
Measured Coordinates are displayed.
Press [ENT] to view the COORD. ON THE
VIRTUAL PLANE screen.
Aim at your desired point and press [ENT].
The Coordinates,which you aim at, are displayed.
Pressing [F4][EDIT] can edit the point name and prism height.
Pressing[F5][DISP] can switch displayed value from
Rectangular data to Polar data.
Press [F2][SAVE] to save the measured data.
When no PN is input, no survey data is saved.
To Next Page
Loading...
