7 General
Installation manual for PMC tendo DD5/PMCprimo Drive3 Page 15
7.4.4.4 Auxiliary supply voltage 24V DC
• Electrically isolated, internal fusing, from an external 24V DC power supply unit with, for
instance, isolating transformer or uninterruptible power supply
7.4.4.5 Operation and parameter setting
• With our user-friendly setup software PDrive, for setup via the serial interface of a PC
• If no PC is available: direct operation by two keys on the servo amplifier and a 3-character
LED display
• Fully programmable via RS232 interface
7.4.4.6 Completely digital control
• Digital current controller (space vector, pulse-width modulation, 62.5 µs)
• Adjustable digital speed controller (62.5 µs)
• Integrated position controller, with adaptation possibilities for all applications (250 µs)
• Integrated step/direction interface for connecting a servomotor to a stepper controller
• Evaluation of resolver signals and sine-cosine signals of high-resolution encoders
• Encoder emulation (incremental, compatible with A quad B or SSI)
7.4.4.7 Comfort functions
• 2 programmable analog inputs
• 4 programmable digital inputs
• 2 programmable digital outputs
• programmable logical combinations of digital signals
7.4.4.8 Expansions
• I/O-14/08 expansion card, p. 103
• PROFIBUS DP expansion card, p. 106
• PMCprimo board and PMCprimo expansion card, p. 109
• CAN adapter expansion module, separated connectors for CAN-bus and RS232, p. 107
To Next Page
Loading...
Need help?
General
