Pima Hunter-Pro Series - Installer Menu Navigation; Enhanced Communication Menu Setup

Programming the System
47
Hunter-Pro Series & Captain 8 Installation Guide
6. Programming the System
6.1 The Installer menu
To enter the Installer menu, enter the Installer code (default 1234):
The Installer menu is made of 12 sub-menus. To enter a menu, press its key, as listed in the
next table:
Key
Menu
Page
[1]
System installation
48
[2]
Zones
50
[3]
Communication
52
[4]
Timers
62
[5]
General parameters
65
[6]
System responses
66
[7]
Outputs configurations
67
[8]
Full programming, Local and Fast download
70
[9]
Installer code change
71
[*]
Express programming
71
[0]
Tests
72
[#]
Video
75
6.1.1 The navigation keys
 [NEXT]/[BACK]: Forward/Backward between screens/options/parameters;
 [ENTR]: Enter/select/confirm;
 [END]: End/Exit: return to the previous/main screen without saving;
 [#]: Reset/Erase/Set the current parameter to '-'/'+' (toggle mode);
6.2 Enhanced communication menu
The Installer menu has an enhanced communication menu with various parameters. By
default, this menu is disabled, because most installations do not require changing the default
settings of these parameters.
 To permanently enable the enhanced menu, set to '+' parameter ‘P’ in the first “General
Parameters” screen (see section 6.8.1, page 65);
 To temporarily enable the menu, press [
*
] for 2 seconds in the "MS 1 Options" screen.
Installer
code
Installer Menu
Choose 1,2..
