EasyManua.ls Logo

Pima Hunter-Pro Series - Locating Expander Zones Tip; RF Interference Prevention Guidelines; Online Communication Monitoring

Pima Hunter-Pro Series
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General Topics
83
Hunter-Pro Series & Captain 8 Installation Guide
Diagram 51. Common application for partitions
A company building is divided into 4 departments: each has its own keypad, employees,
working hours, etc. The employees (i.e. users) can have access only to their
department/partition, or to several.
8.5 Tip: how to locate an expander’s zone
The “All Zones” display type gives detailed information on every zone and enables the installer
to quickly locate it. It is set in the User menu.
8.6 RF interference prevention guidelines
Do not mount the system close to a metal roof or wall;
Leave enough space between the GSM-200 antenna and the closest surface;
Keep wiring to the control panel as far as possible from the antenna;
Install the antenna only after system installation is done;
Make sure the antenna is not bended;
8.7 Online communication monitor
To monitor the panel’s communicating with the Monitoring Station, press 6 for two seconds
and enter the Installer code at any time the panel is communicating with the monitoring
station. The whole process will be displayed onscreen.
ENTR
5
All Zones: 27
Zone 27
ENTR
Display Type:
All Zones
Master
Code
NEXT
X3
All Zones: 27
Wireless Expand.

Table of Contents

Other manuals for Pima Hunter-Pro Series

Related product manuals