EasyManua.ls Logo

Piper Warrior III - CABIN AND COCKPIT GROUP; FUSELAGE AND EMPENNAGE GROUP

Piper Warrior III
1104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PIPER AIRCRAFT, INC.
PA-28-161, WARRIOR III
MAINTENANCE MANUAL
PAGE 9
Nov 30/06
1D3
5-20-00
5. Scheduled Maintenance (continued)
Inspection
NATURE OF INSPECTION Interval (Hrs)
50 100
46. Inspect security of alternator mounting ................................................................ O O
47. Check condition and security of hydraulic line and fluid in
brake reservoir; fill as required ............................................................................. O O
48. Inspect and lubricate controls per Lubrication Chart, 12-20-00 ........................... O
49. Reinstall engine cowling ....................................................................................... O O
C. CABIN AND COCKPIT GROUP
1. Inspect cabin entrance door and windows for damage, operation
and security. (See Note 21.) ................................................................................. O
2. Inspect upholstery for tears .................................................................................. O
3. Inspect seats, seat belts, shoulder harnesses, security brackets, and bolts.
(See Restraint System - Inspection, 25-10-00.) ................................................... O
4. Inspect trim control operation ............................................................................... O
5. Inspect rudder pedals for operation and adjustment ............................................ O
6. Inspect parking brake and brake handle for operation and cylinder leaks ............ O
7. Inspect control column, pulleys and cables for condition.
(See Notes 9, 14, and 32.) .................................................................................... O
8. Inspect flap lever control cable attachment bolt for security and condition ........... O
9. Check landing, navigation, cabin and instrument lights ........................................ O O
10. Inspect instruments, lines and attachments. (See Notes 29 and 31.) ................... O
11. Inspect gyro operated instruments and electric turn and bank.
Overhaul or replace as required............................................................................ O
12. If equipped, replace filters on Attitude Gyro and Heading Indicator...................... O
13. Clean or replace vacuum regulator filter ............................................................... O
14. Inspect altimeter and transponder for installation/certification
per latest revision of AC43.13-1 and tested/inspected
per FAR’s 91.411 and 91.413, respectively........................................................... O
15. Inspect and test ELT per FAR 91.207. (See Testing ELT, 25-60-00.)..................... O
16. Inspect operation of fuel selector valve ................................................................. O
17. Inspect condition of heater controls and ducts...................................................... O
18. Inspect condition and operation of air vents.......................................................... O
19. If installed, inspect portable fire extinguisher minimum weight as specified on
nameplate ............................................................................................................ O
D. FUSELAGE AND EMPENNAGE GROUP
1. Remove inspection plates and panels................................................................... O
2. Inspect baggage door latch and hinges for operation and security....................... O
3. Inspect battery, box and cables. Flush box as required and
fill battery per instructions on box. ........................................................................ O O
4. Inspect electronic installations .............................................................................. O
5. Inspect skins, bulkheads, frames, and stringers for damage. (See Note 33.) ....... O
6. Inspect condition and security of antenna mounts and electric wiring .................. O
7. Inspect fuel lines, valve and gauges for damage and operation ........................... O
8. Inspect security of all lines .................................................................................... O

Table of Contents

Related product manuals