User’s Manual of GS-5220 LCD Series
100
■
Upgrade
Upgrade the firmware via TFTP server
■ Save Startup Config
This copies running-config to startup-config, thereby ensuring that
the currently active configuration will be used at the next reboot.
■ Configure Download
You can download the files from the switch.
■ Configure Upload
You can upload the files to the switch.
■ Configure Activate
You can activate the configuration file present on the switch.
■ ConfigureDelete
You can delete the writable files which are stored in flash.
■ Image Select
Configure active or alternate firmware on this page.
■ Factory Default
You can reset the configuration of the Managed Switch on this
page. Only the IP configuration is retained.
■ System Reboot
You can restart the Managed Switch on this page. After restarting,
the Managed Switch will boot normally.
To Next Page
Loading...
