User’s Manual of GS-5220 LCD Series
108
• Privilege Level
The privilege level of the user.
The allowed range is 1 to 15. If the privilege level value is 15, it can
access all groups, i.e. that is granted the full control of the device. But
other values need to refer to each group privilege level. User's privilege
should be the same or greater than the group privilege level to have
the access to that group.
By default setting, most groups privilege level 5 has the read-only
access and privilege level 10 has the read-write access. And the system
maintenance (software upload, factory defaults and etc.) needs user
privilege level 15.
Generally, the privilege level 15 can be used for an administrator
account, privilege level 10 for a standard user account and privilege
level 5 for a guest account.
Buttons
: Click to add a new user.
Add / Edit User
This page configures a user – add, edit or delete user.
To Next Page
Loading...
