User’s Manual of GS-5220 LCD Series
293
• Mode
Indicates the filtering mode maintained per (VLAN ID, port number,
Group Address) basis. It can be either Include or Exclude.
• Source Address
IP Address of the source. Currently, system limits the total number of IP
source addresses for filtering to be 128. When there is no any source
filtering address, the text "None" is shown in the Source Address field.
• Type
Indicates the Type. It can be either Allow or Deny.
• Hardware Filter /
Switch
Indicates whether data plane destined to the specific group address
from the source IPv4/IPv6 address could be handled by chip or not.
Buttons
Auto-refresh : Automatic refresh occurs every 3 seconds.
: Refreshes the displayed table starting from the input fields.
: Updates the table starting from the first entry in the MVR SFM Information Table.
To Next Page
Loading...
Need help?
General