User’s Manual of GS-5220 LCD Series
401
• Status
The current state of the server. This field takes one of the following values:
Disabled: The server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and
running.
Ready: The server is enabled, IP communication is up and running, and the
RADIUS module is ready to accept access attempts.
Dead (X seconds left): Access attempts were made to this server, but it did
not reply within the configured timeout. The server has temporarily been
disabled, but will get re-enabled when the dead-time expires. The number
of seconds left before this occurs is displayed in parentheses. This state is
only reachable when more than one server is enabled.
RADIUS Accounting Server Status Overview
Object Description
• #
The RADIUS server number. Click to navigate to detailed statistics for this server.
• IP Address
The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of
this server.
To Next Page
Loading...
