User’s Manual of GS-5220 LCD Series
411
State - Shows the state of the server. It takes
one of the following values:
Disabled: The selected server is
disabled.
Not Ready: The server is enabled,
but IP communication is not yet up
and running.
Ready: The server is enabled, IP
communication is up and running,
and the RADIUS module is ready to
accept accounting attempts.
Dead (X seconds left): Accounting
attempts were made to this server,
but it did not reply within the
configured timeout. The server has
temporarily been disabled, but will
get re-enabled when the dead-time
expires. The number of seconds left
before this occurs is displayed in
parentheses. This state is only
reachable when more than one
server is enabled.
To Next Page
Loading...
