User’s Manual of GS-5220 LCD Series
479
The page includes the following fields:
Object Description
• Local Port
The port on which the LLDP frame was received.
• Chassis ID
The Chassis ID is the identification of the neighbor's LLDP frames.
• Port ID
The Port ID is the identification of the neighbor port.
• Port Description
Port Description is the port description advertised by the neighbor unit.
• System Name
System Name is the name advertised by the neighbor unit.
• System Capabilities
System Capabilities describes the neighbor unit's capabilities. The
possible capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If the
capability is disabled, the capability is followed by (-).
• Management
Address
Management Address is the neighbor unit's address that is used for
higher layer entities to assist the discovery by the network
management. This could for instance hold the neighbor's IP address.
To Next Page
Loading...
Need help?
General