User’s Manual of GS-5220 LCD Series
516
• Variable
Indicates the particular variable to be sampled; the possible variables
are:
InOctets: The total number of octets received on the interface,
including framing characters.
InUcastPkts: The number of uni-cast packets delivered to a
higher-layer protocol.
InNUcastPkts: The number of broadcast and multi-cast packets
delivered to a higher-layer protocol.
InDiscards: The number of inbound packets that are discarded even
the packets are normal.
InErrors: The number of inbound packets that contains errors
preventing them from being deliverable to a higher-layer protocol.
InUnknownProtos: the number of the inbound packets that is
discarded because of the unknown or un-support protocol.
OutOctets: The number of octets transmitted out of the interface,
including framing characters.
OutUcastPkts: The number of uni-cast packets that requests to
transmit.
OutNUcastPkts: The number of broadcast and multi-cast packets
that requests to transmit.
OutDiscards: The number of outbound packets that is discarded
even the packets are normal.
OutErrors: The number of outbound packets that could not be
transmitted because of errors.
OutQLen: The length of the output packet queue (in packets).
To Next Page
Loading...
Need help?
General