Polaris RANGER 1000 2020 - Page 530

11.42
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
5. Pivot the rocker panel outward and slide backwards
to remove from the vehicle.
INSTALLATION
1. Slide the rocker panel under the fender and line up
with mounting holes. Pivot the rocker inwards and
align with rear mounting holes.
CAUTION
DRIVER’S SIDE: Use care when pivoting over the fuel
filler neck to avoid dropping debris into the tank.
2. DRIVER’S SIDE ONLY: Install the fuel cap.
3. Install the rear rocker panel push rivet
e
and
fasteners
r
. Torque to specification.
TORQUE
Rocker Panel Fasteners:
42 in-lbs (5 Nm)
4. Install the front rocket panel push rivet
q
and seven
fasteners
w
. Torque to specification.
TORQUE
Rocker Panel Fasteners:
42 in-lbs (5 Nm)
5. Install the side bezel. Refer to Side Bezel Cover
Service page 11.38.
BODY / FRAME