11.36
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
FRONT FASCIA SERVICE
FRONT FASCIA REMOVAL
1. Remove the upper fender. Refer to Front Fender
Service page 11.32.
2. Remove the three push rivets
q
and T-40 torx
fastener
w
. Repeat procedure on passenger side.
3. Remove the two T-40 torx fasteners
e
.
4. Disconnect the headlight connector. Remove the
three T-25 torx fasteners
r
. Remove the headlight
assembly.
5. Pull the front fascia straight up to remove as shown.
NOTICE
Front Bumper removed for clarity.
FRONT FASCIA INSTALLATION
1. Install the front fascia straight down and align with
fastener holes.
NOTICE
Front Bumper removed for clarity.
BODY / FRAME
To Next Page
Loading...
