Polycom 1500 - Unpacking the Realpresence Collaboration Server (RMX) 4000

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Getting Started Guide
Polycom®, Inc. 30
Unpacking the RealPresence Collaboration Server (RMX) 4000
The following procedure has to be performed to ensure the safe unpacking of the RealPresence
Collaboration Server (RMX) 4000 in your site.
To unpack and lift the RealPresence Collaboration Server (RMX) 4000:
1 When you receive the RealPresence Collaboration Server (RMX) 4000 packing case, inspect the
equipment for damage and verify that the components match the packing slip.
2 The RealPresence Collaboration Server (RMX) 4000 is shipped in a packing case with Stratocell®
packaging, and the top cover must be unlocked and lifted.
Boxes are placed on the top Stratocell® and contain the following:
 Installation Accessories. This kit contains the power cables, 4 ethernet cables, USB key and
documentation.
 Rack Installation Accessories. This kit contains the accessories for the 19” rack. For more details,
see Telescopic Rail Runners Accessory Kit .
 Optional - ISDN Package. Contains the ISDN card and ISDN Software License.
Make sure that boxes contain all the required parts.
3 Remove the boxes and top Stratocell® and open the anti-static plastic bag wrapping the
RealPresence Collaboration Server.
Write down the Collaboration Server’s serial number that is on a sticker on the back of the unit. It will
be needed for product registration later in the process.