RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Getting Started Guide
Polycom®, Inc. 37
3 Adjust the telescopic rack rail runner to the rack opening and mount it onto the marked position of
the rear post as described in step 2.
Detail of Rear RealPresence Collaboration Server (RMX) 1500/2000/4000 Rack Spacer Assembly
4 Repeat steps 2 and 3 for the right rack rail runner.
5 Install the flat head screw (item 5), flat washer (item 6) and nut spring
(item 7) in
the middle of the telescopic rack rail runner for added stability as shown in .
• On the Collaboration Server 1500/4000 the center hole on the Rack Spacer must be left clear as
it is required for fixing the Collaboration Server to the rack post.
• On the RealPresence Collaboration Server (RMX) 2000 the top hole on the Rack Spacer must be
left clear as it is required for fixing the Collaboration Server to the rack post.
To Next Page
Loading...
