Chapter 3: Using the Web Interface
To use a different SMTP server, select the "Use custom settings"
radio button. The fields for customized SMTP settings appear. For
information on each field, see
Configuring SMTP Settings
(on page
196).
5. Select the webcam that is capturing the images you want sent in the
email.
6. Adjust the values of the following:
Number of Snapshots - the number of snapshots to be taken
when the event occurs. For example, you can specify 10 images
be taken once the event triggers the action.
Snapshots per Mail - the number of snapshots to be sent at one
time in the email.
Time Before First Snapshot - the amount of time in seconds
between when the event is triggered and the webcam begins
taking snapshots.
Time Between Snapshots - the amount of time in seconds
between when each snapshot is taken.
Send an SNMP Notification
This option sends an SNMP notification to one or multiple SNMP
destinations.
Operation:
1. Choose Device Settings > Event Rules > .
2. Select "Send SNMP notification" from the Action list.
3. Select the type of SNMP notification. See either procedure below
according to your selection.
To send SNMP v2c notifications:
1. In the Notification Type field, select SNMPv2c Trap or SNMPv2c
Inform.
2. For SNMP INFORM communications, leave the resend settings at
their default or do the following:
a. In the Timeout field, specify the interval of time, in seconds, after
which a new inform communication is resent if the first is not
received. For example, resend a new inform communication
once every 3 seconds.
b. In the Number of Retries field, specify the number of times you
want to resend the inform communication if it fails. For example,
inform communications are resent up to 5 times when the initial
communication fails.
To Next Page
Loading...
Need help?
General
