Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
IMUX 2000E1 RFL Electronics Inc.
July 22, 2008 xv 973.334.3100
REVISION RECORD
Rev Description Date Approval
9-15-00 New Release – IMUX 2000 Instruction Manual (2000E1) updated to
IMUX
2000R Instruction Manual (MC2000R) with extensive
revisions to incorporate CM3R module. (Derived from 2000E1, 3-
31-00)
9-2
9-00
CS
4-1
0-01
Re
vised Sections: 0, 2, 6, 7, 8, 16, 17 & 18 in accordance with ECO
No. 2
000-315, 2000-316 and RFA No. 5782, 6862, 7419, 7420,
7435, 7436 & 7725.
Added new 2000R Product Information Sheet.
Added new DS5621 (dated 4-8-01).
Added new VF5A (dated 4-10-01).
Added new DSTT (dated 4-10-01)
Added new Status Module (dated 4-2-01)
Added new TMX/TMR (dated 4-3-01)
Added: MTS local/remote operation
MTS alarm reporting over SCB
DS562I alarm reporting over SCB
CM3R storage of settings in FLASH
DSO squelching
4-1
0-01
CS
4-23-01 Revised Section: 0, 11 & 21.
Updated power supply section.
Added Application Notes 10, 11, 12 & 13 to Section 21.
4-2
3-01
CS
5-1
7-01
Re
vised DS-TT in accordance with ECO No. 2000-323 and RFA
No. 8008.
Created electronic file formats for the
following Instruction Data
Sheets: DS-64NC, VF10B/11B, VF15/16, and DS-961D.
Revised Section 6 as follows: Added Figure 6-4 for setting jumpers
for CM4 external clock s
ource.
Revised Section 8 in accordance with RFA No.
7637 as follows:
Changed dash “-“ to underscore “_” on NEXT command.
Revised Section 12 in accordance with RFA No.
7645 as follows:
Added Table 12-2.
5-1
7-01
CS
6-26-01 Added module adapters to VF10B/11B, VF10D, VF15/16, VF15C,
VF17/18
and DA191A.
Created electronic file format for the VF17/18.
6-26-01 CS
7-2-
01
Upd
ated DA-91I, DA-191A and DS-64NC.
Added DA-191B.
7-27-01 CS
To Next Page
Loading...
