RFL IMUX 2000 - 7.2.2 DATA CIRCUITS

Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
7.2.2 DATA CIRCUITS
For local operation, connect a video terminal or PC directly to the remote port on an IMUX 2000
Series multiplexer (Figure 6-1) using an RS-232 cable. Or, using modems, establish a remote
connection over a dial-up voice circuit (Figure 6-2).
PC or
TERMINAL
IMUX 2000
MULTIPLEXE
R
RS-232 Cable
Command
Response
OTHER
MULTIPLEXERS
E1 LINK WITH ESF
(1)
Figure 7-1. Local connection
PC or
TERMINAL
IMUX 2000
MULTIPLEXE
R
Modem
Modem
Public Network
Response
Command
OTHER
MULTIPLEXERS
E1 LINK
WITH ESF
(1)
Figure 7-2. Remote connection over a dial-up circuit
IMUX 2000E1 RFL Electronics Inc.
February 28, 2006 7-3 (973) 334-3100