Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
RFL VF-16B RFL Electronics Inc.
January 17, 2007 22 (973)
334-3100
29. Verify that the voice levels are adequate. If not, adjust the levels in accordance with Table 3.
30. On the Module Record Card (located to the right of the shelf) record the channel bank type,
time slot, and any other pertinent information.
The RFL VF-16B is now installed. If your multiplexer is set up for remote access and control, you can
now change the operating parameters of the module by using simple commands. For more information
on remote access and control, consult your multiplexer operation manual.
To Next Page
