USING SERVICE PROGRAM MODE
SM 5-13 B044/B045/B046
Service
Tables
4
Mode Number/Name Function/[Setting]
Spot Dot Enhancement Select
964*
Selects emphasis used for lone dots, for the mode
selected by SP4-921. IP
[–2 ~ 2 / 0 / 1/step
Toner Save Level965*
Sets the toner save level for the mode selected by SP4-
921.
[0 ~ 4 / 0 / 1/step], where:
0: The mode's default value is used.
1: Thin lines
2: Mask 1 (with edge detect)
3: Mask 2 (no edge detect)
4: Mask 3 (with edge detect)
Smoothing Select966*
Selects whether smoothing is used for the mode selected
by SP4-921. IP
[0 ~ 4 / 0 / 1/step], where:
0: The mode's default value is used.
1: OFF
2: ON
To Next Page
Loading...
