SERVICE RAM ADDRESSES
SM 5-47 B465
Fax Unit
B465
400050 to 40006F(H) - Communication bit switches
400070 to 40007F(H) - G3 bit switches
4000C0(H) - User parameter switch 00 (SWusr_00)
Bit 0: Not used
Bits 1 to 3: Scanning contrast home position
Bit 3 2 1 Setting
000Normal
0 0 1 Lightest
0 1 0 Darkest
1 0 1 Lighter
110Darker
Bits 4 and 5: Scanning resolution home position
Bit 5 4 Setting
0 0 Standard
0 1 Detail
10Fine
11Not used
Bit 6: Transmission mode home position 0: Memory tx, 1: Immediate tx
Bit 7: Halftone home position 0: Disabled, 1: Enabled
4000C1(H) - User parameter switch 01 (SWusr_01)
Bits 0 to 6: Not
Bit 7: Settings return to home position after scanning 0: Disabled, 1: Enabled
4000C2(H) - User parameter switch 02 (SWusr_02)
Bit 0: Forwarding mark printing on forwarded messages 0: Disabled, 1: Enabled
Bit 1: Center mark printing on received copies 0: Disabled, 1: Enabled
Bit 2: Reception time printing 0: Disabled, 1: Enabled
Bit 3: TSI print on received messages 0: Disabled, 1: Enabled
Bit 4: Checkered mark printing 0: Disabled, 1: Enabled
Bits 5 and 7: Not used
4000C3(H) - User parameter switch 03 (SWusr_03: Automatic report printout)
Bit 0: Communication result report (memory transmissions) 0: Off, 1: On
Bit 1: Not used
Bit 2: File reserve report (memory transmission) 0: Off, 1: On
Bit 3: File reserve report (polling reception) 0: Off, 1: On
Bit 4: Communication result report (polling reception) 0: Off, 1: On
Bit 5: Transmission result report (immediate transmissions) 0: Off, 1: On
Bit 6: Not used
Bit 7: Journal 0: Off, 1: On
4000C4(H) - User parameter switch 04 (SWusr_04: Automatic report printout)
Bits 0 to 6: Not used
Bit 7: Inclusion of a sample image on reports 0: Off, 1: On
4000C5(H) - User parameter switch 05 (SWusr_05)
Bit 0: Substitute reception 0: Enabled, 1: Disabled
Bit 1: Memory reception if no RTI or CSI received 0: Possible, 1:
Impossible
Bits 2 and 3: Not used
To Next Page
Loading...
