Ricoh aficio 1013F - Page 321

SERVICE RAM ADDRESSES
SM 5-49 B465
Fax Unit
B465
4000CC(H) - User parameter switch 12 (SWusr_0C)
Bit 0: Not used
Bit 1: Distinctive Ring detection (NA only) 0: Off, 1: On
Bit 2: Toner saving mode 0: Disabled, 1: Enabled
Bits 3 to 7: Not used
4000CD(H) - User parameter switch 13 (SWusr_0D)
Bits 0 and 1: PSTN access method from behind a PABX
Bit 1 0 Setting
00PSTN
0 1 Loop start (prefix)
1 0 Ground start
1 1 Flash start
Bits 2 to 7: Not used
4000CE(H) to 4000D8 - User parameter switch 14 to 24 (SWusr_0E to 18)
Bits 0 to 7: Not used
4000D9(H) - User parameter switch 25 (SWusr_19)
Bits 0 to 3: Not used
Bit 4: RDS operation 0: Not acceptable
1: Acceptable for the limit specified by system switch 03
Note: This bit is only effective when RDS operation can be
selected by the user (system switch 02 bits 6 and 7).
Bits 5 and 6: Not used
Bit 7: Daylight saving time (User tools) 0: Disabled, 1: Enabled
4000DA(H) - User parameter switch 26 (SWusr_1A)
Bit 0 and 1: Dialing type
(This switch is not printed on the user parameter list.)
Bit 1 0 Setting
0 0 Pulse dialing (10 pps)
0 1 Pulse dialing (20 pps)
1 0 Tone (DTMF) dialing
Bits 2 to 7: Not used
4000DB(H) - User parameter switch 27 (SWusr_1B)
PSTN access code from behind a PABX (Key operator tools)
(This switch is not printed on the user parameter list.)
Access number Hex value to program (BCD)
0F0
! ➨ !
9F9
00 00
! ➨ !
99 99