PAPER TRAY UNIT HEATER
B044/B045/B046 1-16 SM
17. Pull the excess length of the heater's
harness out the hole at the rear [A].
NOTE: Be sure that the harness passes to
the side of the grounding plate [B]
at the bottom of the hole. (The front
of the grounding plate must remain
clear.)
18. Arrange the excess harness length so that it sits beneath the
FCU cover plate.
19. Attach the caution decals
to the locations shown in
the illustration.
20. Reinsert the paper trays, and reattach the copy tray and the rear cover.
B046I522.WMF
B046I523.WMF
[A]
[B]
To Next Page
Loading...
