EasyManua.ls Logo

Ricoh D009 - Page 418

Ricoh D009
1209 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Service Call Conditions
D009/D011/D012/D013/D091/D092 3-50 SM Appendix
859 C
HDD Encryption unit error 2
A serious error occurs when the HDD data is encrypted to update an
encryption key with the HDD encryption unit.
[8]
HDD check error:
The HDD is not correctly installed.
No HDD installed
Unformatted HDD
The encryption key on the controller is different from the one on the HDD
1. Install the HDD correctly.
2. Initialize the HDD.
[9]
Power failure during the data encryption:
The data encryption (NVRAM and HDD) has not been completed.
Power failure during the data encryption
Initialize the HDD.
[10]
Data read/write error:
The DMAC error is detected twice or more.
Same as SC863
860 B
HDD startup error at main power on
HDD is connected but a driver error is detected.
The driver does not respond with the HDD within 30 s.
HDD is not initialized
Label data is corrupted
Defective HDD
Initialize the HDD with SP5832-001.

Table of Contents

Related product manuals